Make a Simple Gyroscope from RC-ROM
gyroscope is a device for measuring or maintaining orientation, based on the principle of preserving angular momentum. Mechanical gyroscopes typically comprise a spinning wheel or disc in which the axle is free to assume any orientation. (Wikipedia)
How gyroscope works? see this link gyroscopes.org/how.asp
Building of simple gyroscope using a CD drive parts e.g motor, CD, and CD rotor hub and other parts, pencil, 9 volt battery or DC 9V adapter .
I will show you how to make a simple Gyroscopee Step by Step in pictures.
Take old CD -ROM Drive and open it
CD -ROM Drive
take DC motor
DC motor
Disc drive hub ( spindle platter)
Disc drive hub ( spindle platter) with motor router
Disc drive hub ( spindle platter) Holder
open the top of CD ROM body and get a Disc drive hub holder
Disc drive hub holder
Required parts of CD-ROM Disc drive hub holder, CD Disc drive hub, DC motor
separate the motor magnet rotor Disc drive hub ( spindle platter)
Attach the motor shaft with Disc drive hub ( spindle platter)
Attach the motor shaft with Disc drive hub ( spindle platter) by the help of supper glue or glue gun
motor shaft with Disc drive hub ( spindle platter)
Disc drive hub ( spindle platter) is fixed on motor
Disc drive hub ( spindle platter) is fixed on motor
stick a pencil with back side of motor with supper glue and sand
stick a pencil with back side of motor with supper glue and sand
Simple Gyroscope from CD-ROM is ready for the action
An other design of Simple Gyroscope with three Cd's
Tow Simple Gyroscope
Warning: cd rotors are dangerous! It may cracked and exploded. so please wear safety glasses for you and your students safety Please be aware that the speed of the gyroscope is pretty fast even using a single AA battery and it is not suitable for young children.
View Comments
Good and educative,keep it up !
Thank you.
thanks for the sharing