DIY Electric Scissor from CD-ROM

Simple Do-it your self (DIY0 Electric Scissor from CD-ROM parts. In this project you will learn how circular motion converted in to linear motion and where we can use. In this experiment we made automatic scissor cuter.

Required Material:

  • A scissor
  • Old CD-ROM
  • 2 inch steal wire
  • 9v Battery

Construction:

Here is step by step construction of  DIY electric scissor from CD-Rom drive in photos

Old CD Rom
Old CD Rom

 

Remove upper parts of Old CD Rom
Remove upper part of Old CD Rom

 

CD slider mechanism (gears and pulleys ) is required
CD slider mechanism (gears and pulleys ) is required which is mention by arrow

 

cut one side of gear box mention by red arrow
cut one side of gear box mention by red arrow

 

cut an other side of gear box mention by yellow arrow
cut an other side of gear box mention by yellow arrow

 

Take one and half inch of steal wire and make a hole in this gear
Take one and half inch of steal wire and make a hole in this gear

 

IMG_4557
Take a scissor and remove it one plastic handle and place on gear of  body with the help of supper glue. fixed a steal wire with gear and upper part of scissors plastic handle

 

Simple DIY Electric Scissor from CD-ROM
Simple DIY Electric Scissor from CD-ROM is almost complete

 

soldering a 9c battery connector with motor circuit
soldering a 9v battery connector with motor circuit
soldering a 9c battery connector with motor circuit and use its builtin switch connect in series between motor and battery
soldering a 9c battery connector with motor circuit and use its builtin switch connect in series between motor and battery
DIY Electric Scissor from CD-ROM is ready for action
DIY Electric Scissor from CD-ROM is ready for action

 

Watch Video: Simple DIY Electric Scissor from CD-ROM in action

 

 

1 Comment

Leave a Reply