{"id":74,"date":"2015-02-27T20:42:41","date_gmt":"2015-02-27T20:42:41","guid":{"rendered":"http:\/\/paksc.org\/pk\/?p=74"},"modified":"2021-10-05T15:22:06","modified_gmt":"2021-10-05T15:22:06","slug":"1137-diy-project-make-your-own-electric-generator","status":"publish","type":"post","link":"https:\/\/paksc.org\/pk\/diy-projects\/1137-diy-project-make-your-own-electric-generator\/","title":{"rendered":"AC Generator, Simple DIY project with Step by Step instructions"},"content":{"rendered":"

AC Generator, Simple DIY project with Step by Step instructions<\/h2>\n

Introduction<\/h3>\nAC generator discusses the conversion of mechanical energy (kinetic energy) into electrical energy by using magnetic induction and emf. It focuses on the working principles and components used in it.\u00a0 The interchange of different energies and electricity generation by the process of induction can be completely explained by AC generator.\n

Material required:<\/span><\/h3>\nFor construction of Electric Generator you need following things and tools.\n<\/span>\n
    \n \t
  1. Supper Glue (Elfi) 20 ml<\/span><\/li>\n \t
  2. Paper Tape<\/span><\/li>\n \t
  3. Iron Strips 2\n<\/span><\/li>\n \t
  4. 1\/5'\" PVC Pipe<\/span><\/li>\n \t
  5. 6\" long Iron Nail<\/span><\/li>\n \t
  6. LED's<\/span><\/li>\n \t
  7. Copper Wire 30 to 34 gauge\n<\/span><\/li>\n \t
  8. 4 Magnets\n<\/span><\/li>\n \t
  9. 6'' wooden Piece\n<\/span><\/li>\n<\/ol>\n

    Tools:<\/span><\/h3>\n
      \n \t
    1. Iron saw\n<\/span><\/li>\n \t
    2. Soldiering Iron\n<\/span><\/li>\n \t
    3. Drill Machine\n<\/span><\/li>\n \t
    4. Screwdriver<\/span><\/li>\n \t
    5. pliers<\/span><\/li>\n \t
    6. Roller<\/span><\/span>\n\n
      \"Tools\"<\/a>
      Tools<\/figcaption><\/figure>\n\n\u00a0<\/span><\/li>\n<\/ol>\n

      Diagrams of AC Generator parts<\/h3>\n

      1 The Stator<\/span><\/strong><\/h3>\nThe stator is made of 2.5 inch long 10 iron strips joint together with paper tape and have copper winding on it.\n\n
      \"Copper
      Copper coil winding<\/figcaption><\/figure>\n

      Copper coil winding<\/span><\/strong><\/p>\n\n

      2 The Rotor:\n<\/span><\/strong><\/h3>\nRotor is made by using a piece of PVC pipe, 4 magnets <\/span>and iron nail.<\/span>\n<\/span><\/strong>\n\n
      \"AC<\/a>
      AC (Alternating current) Generator Rotor side view<\/figcaption><\/figure>\n

      AC (Alternating current) Generator Rotor side view<\/strong><\/p>\n\n\n

      \"AC<\/a>
      AC (Alternating current) Generator Rotor side view<\/figcaption><\/figure>\n

      AC (Alternating current) Generator Rotor front view<\/strong><\/p>\n

      \"AC\n<\/strong><\/p>\n

      AC (Alternating current) Electric Generator<\/span><\/strong><\/p>\n

      \"AC\n<\/strong><\/p>\n

      AC electric Generator in action<\/p>\n

      \"\"<\/p>\n

      Habab<\/strong> Idrees Pakistan Science Club's Host<\/strong>\n<\/a><\/strong><\/p>\n\n

      Steps of Construction<\/h3>\n

      Making of Coil<\/h4>\n
        \n \t
      • Measure 2 \u00bd inch of iron strip and cut 10 equal parts of it.<\/li>\n \t
      • Firmly hold and pile all parts together using paper tape in a way that there should be no space between strips.<\/li>\n \t
      • Wound approximately 300 turns of copper wire around the bundle of strip vertically. Wrap paper tape around it so it will not get unwound.<\/li>\n \t
      • We need two such coils to make an AC generator.<\/li>\n<\/ul>\n

        Making of Rotor<\/h4>\n
          \n \t
        • Take half inch diameter PVC pipe and cut a piece of 2 \u00bd inches<\/li>\n \t
        • Stick 4 bar magnets on the piece of pipe with the help of super glue<\/li>\n \t
        • Make sure the same pole of magnets must be in alternative manner. It will be in the order of North-South-North-South.<\/li>\n \t
        • Check out the poles of magnets if they are aligned right by using another magnet.<\/li>\n<\/ul>\n

          Axle making<\/h4>\n
            \n \t
          • Make an axle using 6\u201d long iron nail.<\/li>\n \t
          • Leave half inch from the tail of nail and mark the length of magnetic rotor.<\/li>\n \t
          • Wrap paper tape on the nail in a way that the magnetic rotor get fix on it.<\/li>\n<\/ul>\n

            Body of the Generator<\/h4>\n
              \n \t
            • Take 6\u00d76\" wooden piece and two pieces of PVC pipes (one is of 2\" and the other is should be of 1\").<\/li>\n \t
            • Make vertical groove on the 1 inch PVC pipe.<\/li>\n \t
            • Align it with 2 inches piece and make a hole in it.<\/li>\n \t
            • Fix the axle through both PVC pipes and check if it is perfectly leveled.<\/li>\n \t
            • Stick the PVC pipes on the wooden base with the help of super glue.<\/li>\n \t
            • Make 2 more coils as previously discussed leaving both of their terminals outside the tape.<\/li>\n \t
            • Cut 2 pieces of PVC pipes measuring half inch.<\/li>\n \t
            • Join the pieces perpendicular to the axle (one at each side) at the base.<\/li>\n \t
            • Fix coil on each of the PVC pipe.<\/li>\n \t
            • Burn the coating of coils at the terminals using lighter.<\/li>\n<\/ul>\n

              Testing<\/h3>\n
                \n \t
              • Join the LED with the coil and rotate the nail, the LED will glow.<\/li>\n \t
              • If both the coils are connected in series then LED will glow brighter.<\/li>\n<\/ul>\nNote:\u00a0<\/strong>The construction of the generator can be seen in this video (language is Urdu). English subtitles have been added for international visitors.\n\n
                \n\n

                Watch Video\n<\/span><\/h2>\n